Opinion on agp turbos - Dodge SRT Forum

May 26, 2010 · Opinion on agp turbos. Jump to Latest ... Dodge SRT Forum. 9.5M posts 107.5K members Since 2002 The community to discuss high-performance Dodge vehicles from the …

CouponFollow Extension

FAQs about Opinion on agp turbos - Dodge SRT Forum Coupon?

Are AGP turbos bolt-on?

Since 2006, AGP has been developing, building, and testing new technology turbo combinations that flat-out blow the doors off the competition. This turbo is true bolt-on. No hacking or denting of the firewall is needed. No matter what your goals are, we have a turbo option that will fit your needs. ...

Are all AGP turbos ball bearing?

*Note that all AGP turbos are Ball Bearing. AGP 50 trim: This has been the standard that all street/pump gas turbos have been measured against for years. This is a great match for the 2.4L motor for maximum power with the stock rev limiter and the only "old technology" turbo worthy of being installed. ...

How much power does a gt3076r Turbo have?

GT3076R: The turbo has a 52lb/min 56 trim compressor wheel in a 4” inlet port shroud compressor housing to minimize the chance of compressor surge. The turbine wheel is the standard 84 trim GT30. Full boost should be right around 3400rpms with a .63 A/R turbine housing. The maximum boost is around 33psi where we have seen 520whp. ...

What is a gtx3071r Gen 2 Turbo?

GTX3071R Gen 2: This turbo utilizes Garrett's forged, fully machined compressor wheel. Spool characteristics are very similar to the GT3071R (roughly 3100rpm for full boost), but this will support about another 50-60 more hp, maxing out to about 500hp. ...

How much power does a s256sx Turbo make?

S256sx - The 56mm Extended Tip'd S200sx turbo is rated at 55lbs/min and will make around 510whp at 30psi in the .63 A/R turbine housing. Full boost can be seen around 3500rpm in the .63 A/R turbine housing. Compressor housing is 3" inlet and 2" outlet, non ported shroud. ...

How much horsepower does a gtx3076r have?

GTX3076R Gen 2: Using Garrett's billet compressor wheel, the GTX3076R is capable of supporting just about 600hp. Just like the GT3076R, this turbo has a 4" inlet ported shroud compressor housing with a 2" outlet, and will see full boost around 3400rpm in the .63 A/R turbine housing. ...